Titan LED Engine, 15W, CRMX + Wired DMX
Say hello to our next-generation multi-purpose light. In addition to being a battery-powered uplight and spotlight with 5 different beam options, multiple PixelBricks can be connected to form clusters and shapes. With about 10cm edge length and 1kg weight, it is small and lightweight while still featuring a powerful output of high-quality light which meets the highest demands of film, TV and stage clients.
Optical
- Order Code: PB15
- LED Engine: Titan LED Engine
- Colors: RGB Mint Amber
- Total LED Power: 15W
- Power Draw: 12W
- Light output: 2700K, 3200K, 5500K:* 388lm, 450lm, 375lm
- CRI(Ra)/TLCI 3200-6500K*: ≥96
- Beam Angle: 13°
- Strobe: 0 – 25Hz
- Pixels: 1
- (*Typical value)
Electrical
- Battery Lifetime: 70% after 300 cycles
- Battery Runtime: Up to 20 hours
- Charging time (nominal): 4 Hours
- Input Voltage: 24VDC
- Input Current: 0.8A
Control
- Wired DMX: Yes (via PWB-2-86)
- CRMX Receiver: Built-in
- Wireless Frequencies: CRMX 2.4GHz, UHF, Bluetooth
- Range (m/yds): 300 / 330yds
Construction
- Housing: Aluminum
- IP Rating: IP65
- Ambient Temperature: 0-40˚C | 32-104˚F
- Weight (kg/lbs): 1.12 kg / 2.47 lbs
- Dimensions (mm/inches):
91 x 91 x 94 / 3.6 x 3.6 x 3.7
(No AsteraBox required)
Astera System
A smart lighting control system where Infrared remote, wireless DMX and app work together to enable big setups on stage & events that can be set up, monitored and adjusted in a fast and convenient way.
Control Fixtures
Create complex programs out of colors, effects and settings. The fixtures will remember and repeat these effects without requiring a constant wireless link. Quickly create groups of lights, assign positions and select which fixtures should receive commands.
Monitor Lights
Keep a complete overview over the status and all settings of your
fixtures while you operate them.
View battery status, radio signal, DMX address and which stage lights or
fixture you have targeted.
Diagnose individual fixtures and even get informed if one is being moved
or switched off.
This works while you control lights by the app but also if lights are
controlled via DMX.
Set-Up Faster
Set up your entertainment fixtures conveniently out of the distance.
Set DMX address and DMX footprint for one or several fixtures; over 50
units can be prepared in less than 5 minutes out of a distance.
After your job, do a quick master reset of all settings or a partial one
of only selected settings.
LumenRadio
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable Wireless DMX protocol available in the Stage Lighting and entertainment industry.
Full Compatibility
Astera fixtures can be controlled by LumenRadio CRMX transmitters and
also by W-DMX from wireless solutions (up to G4S).
These Battery Operated Fixtures support both wireless DMX standards so
you can use them together with almost all other wireless fixtures and
transmitters.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent
with our infrared remote control directly to the fixtures.
When programming lights with the AsteraApp, the IR remote can be used
for confirming settings on individual entertainment fixtures.
Features Unique to PB15 PixelBrick
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your event and be sure that your lights won’t run out while still getting the maximum brightness.
TruColor Calibration
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Flicker Free
Astera allows to adjust the PWM frequency to make sure it doesn’t interfere with your camera’s frame rate.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Scheduled Standby
Switch lights into power-saving standby and schedule them to wake up when the event starts.
Dynamic Power-Boost
The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colours.
Emergency Light
Switches automatically to white light and runs of its battery when AC power is cut off.
Anti-theft
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraApp™ is packed with many additional items and new features are frequently added via software update.
