60W RGBW (4 x 15W) CREE LEDs – 13 ° beam angle
Battery powered PAR, Astera’s working bull with a standard beam features 4 ultra-bright CREE LEDs and comes in a rugged, waterproof housing with a multifunctional bracket. It can be controlled with infrared remote control, AsteraApp, CRMX and/or W-DMX.
Light Output: 60W
Luminous Flux: 1675Lm
Lighting: 6250 Lx
Beam Angle: 13 ˚
Wireless Modules: 865-870MHz | 902-928MHz | 2.4GHz
Range: 300m | 330 Yards
Wired DMX: not supported
Wireless DMX: CRMX & others, excluding W-DMX G5, City Theatrical
Battery: LG Chem Lithium-ion
Battery Lifetime: 70% after 300 cycles
Battery Runtime: Up to 20 hours
LED Lifetime: 50.000 Hours
Charging time (nominal): 7 Hours
Input Voltage (charger): 90-264V 47-63Hz
Input Current (light):1.8A / 115VAC | 1.0A / 230VAC
Inrush current: Cold start 60A / 230VAC
IP Rating: IP65
Relative humidity: 0-100%
Operating Temperature: 0-40 ˚C | 32-104 ˚F
Weight: 6.10kg |13.4482Lbs
Dimensions: 279 x 296 x 253 (mm) | 10.9 x 11.6 x 9.7 (inches)
CRMX Nova TX
32 ° Filter
17 ° x 46 ° WallWash filter
17° x 46° Rotating filter
A smart lighting control system where Infrared remote, wireless DMX and app work together to enable big setups on stage & events that can be set up, monitored and adjusted in a fast and convenient way.
Create complex programs out of colors, effects and settings. The fixtures will remember and repeat these effects without requiring a constant wireless link. Quickly create groups of lights, assign positions and select which fixtures should receive commands.
Keep a complete overview over the status and all settings of your fixtures while you operate them.
View battery status, radio signal, DMX address and which stage lights or fixture you have targeted.
Diagnose individual fixtures and even get informed if one is being moved or switched off.
This works while you control lights by the app but also if lights are controlled via DMX.
Set up your entertainment fixtures conveniently out of the distance.
Set DMX address and DMX footprint for one or several fixtures; over 50 units can be prepared in less than 5 minutes out of a distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable Wireless DMX protocol available in the Stage Lighting and entertainment industry.
Astera fixtures can be controlled by LumenRadio CRMX transmitters and also by W-DMX from wireless solutions (up to G4S).
These Battery Operated Fixtures support both wireless DMX standards so you can use them together with almost all other wireless fixtures and transmitters.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the fixtures.
When programming lights with the AsteraApp, the IR remote can be used for confirming settings on individual entertainment fixtures.